Translate
Violation Detail
Standard Cited: 19040039 A02
Inspection Nr: 1046161.015
Citation: 03001
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $4,950.00
Current Penalty: $0.00
Issuance Date: 08/12/2015
Nr Instances: 1
Nr Exposed: 105
Abatement Date: 06/30/2016
Gravity:
Report ID: 0524700
Contest Date: 08/21/2015
Final Order: 06/15/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 06/15/2016 | $0.00 | 06/30/2016 | Other | |
| Penalty | C: Contested | 08/26/2015 | $4,950.00 | 08/19/2015 | Other | |
| Penalty | Z: Issued | 08/12/2015 | $4,950.00 | 08/19/2015 | Other |
Text For Citation: 03 Item/Group: 001 Hazard:
29 CFR 1904.39(a)(2): Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, the employer did not report the in-patient hospitalization, amputation, or loss of an eye to OSHA. A) Quality Blow Molding, Inc., located at 635 Oberlin Elyria Road, Elyria, OH 44035: On or about March 2, 2015, the employer did not notify OSHA within twenty-four hours after an in-patient hospitalization and amputation injury occurred on B-13 plastic injection blow molding machine #1. The delay in reporting of the in-patient hospitalization and amputation injury to OSHA can result in the delay of the incident investigation and identification of hazards.