Text For Citation: 02 Item/Group: 034 Hazard:

29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): A. Plastics Finishing: On, or about, August 27, 2021, an open light socket was located in the blast chamber of Machine #358, a Wheelabrator tumble blast machine. B. Plastics Finshing: On, or about, August 27, 2021, a General Electric circuit breaker panel labeled "Lights" did not present a dead front when the door was opened. Circuit breakers/blanks were not provided to fill the spaces which exposed the live buss bars. C. Injection Molding Department, Machine #204: On, or about, September 2, 2021, a Plastics Processing Equipment Model BTC 15 auxiliary temperature control unit had a gap between a control unit and the frame of the machine, explosive live electrical parts. D. Powder Metal Compacting: On, or about, September 29, 2021, a cover was not provided over the cam box located on the back side of Machine #92, a Cincinnati mechanical powder compacting press. E. Powder Metal Compacting: On, or about, September 29, 2021, a cover was not provided over the cam box located on the left side of Press #86, a Yoshizuka mechanical press.