Text For Citation: 02 Item/Group: 033C Hazard:

29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: A. Plastics Department, Negri Bossi H1600 Injection Molding Machine: On, or about, July 28, 2021, a pallet was stored in the working space of the Eaton fused disconnect switch. B. Thermoset Department: On, or about, July 28, 2021, an oil heater and a portable ladder were stored in the working space for a bank of electrical boxes and controls. C. Thermoset Department: On, or about, July 28, 2021, a rolling tool box and cardboard boxes were stored in front of a distribution panel and two panelboards. D. MRB Room: On, or about, August 6, 2021, a pallet was stored in front of a General Electric Load Center circuit breaker panel. E. Plastics Finishing: On, or about, August 27, 2021, a ladder, bags of media, a hose reel and boxes were stored in front of disconnect and control boxes for the steam boiler and wheelabrator equipment. F. Plastic Molding Area: On, or about, August 27, 2021, a pallet was stored in front of two General Electric circuit breaker panels. G. Injection Molding Department: On, or about, September 2, 2021, shelving used to storage change-over components for the injection molding machine was located under a GE panelboard that contained circuit breakers for Press 209 and a grinder.