Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1542164.015
Citation: 02021
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,557.00
Current Penalty: $4,000.00
Issuance Date: 01/06/2022
Nr Instances: 3
Nr Exposed: 7
Abatement Date: 02/24/2022
Gravity: 10
Report ID: 0112000
Contest Date:
Final Order: 02/11/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/11/2022 | $4,000.00 | 02/24/2022 | Serious | |
| Penalty | Z: Issued | 01/06/2022 | $9,557.00 | 02/24/2022 | Serious |
Text For Citation: 02 Item/Group: 021 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): A. Thermoset Department: On, or about, July 28, 2021, Machine 306, a hydraulic forming press, was provided with a single lever to start the press for each cycle. The second control button was not operational. B. Old Pill Room: On, or about, July 28, 2021, the barrier guard provided on the Green preforming press allowed access to the point of operation by reaching under the guard. C. Plastics Finishing: On, or about, August 27, 2021, the two hand controls provided on machine #21014, a Patton-MacGuyer press, did not incorporate an anti-tie down relay.