Violation Detail
Standard Cited: 19100305 G01 IV A Wiring methods, components, and equipment for general use.
Inspection Nr: 1450674.015
Citation: 02014
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/19/2020
Nr Instances: 3
Nr Exposed: 25
Abatement Date: 06/22/2020
Gravity:
Report ID: 0420600
Contest Date:
Final Order: 06/15/2020
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 06/15/2020 | $0.00 | 06/22/2020 | Other | |
Penalty | Z: Issued | 05/19/2020 | $0.00 | 06/22/2020 | Other |
Text For Citation: 02 Item/Group: 014 Hazard:
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a. On or about 12/12/2019, at the fabrication area near the Concept 91 MEP Bending Machine workstation, employees were exposed to electrical hazards, in that an extension cord was used in place of fixed wiring to run a fan and a speaker. b. On or about 12/12/2019, at the fabrication area near the small MEP Bending Machine workstation, employees were exposed to electrical hazards, in that an extension cord was used in place of fixed wiring to run a fan. c. On or about 12/12/2019, south-east side of the fabrication area, employees were exposed to electrical hazards, in that, two extension cords were plugged on a receptacle mounted on an exterior beam and were used in place of fixed wiring.