Text For Citation: 02 Item/Group: 013A Hazard: REFINERY

29 CFR 1910.119(d)(3)(ii): The employer does not document that the equipment in the process complies with recognized and generally accepted good engineering pra ctices: a.BP-Husky Refining, LLC - Oregon, Ohio: The employer does not document compliance with recognized and generally accepted good engineering practices by ensuring PSV-115, located in the Alky Unit, is properly designed. PSV-115 provid es protection to the Recycle Isobutane Coalescer by relieving hydrocarbons to th e flare and was determined to be undersized and does not have an adequate reliev ing rate during relief scenarios. Pursuant to 29 CFR 1903.19, within ten (10) ca lendar days of the abatement date, the employer must submit documentation that i t has abated the hazard. In addition, under 29 CFR 1903.19(e), the employer must submit an abatement plan describing the actions it is taking to ensure that it is in compliance with the standards for all pressure vessels in the refinery, including documentation that each pressure vessel is evaluated and protected by pressure-relieving device(s) that is appropriate for the vessel in accordance wi th recognized and generally accepted good engineering practices, such as the ASM E Boiler and Pressure Vessel Code. The abatement plan shall establish dates duri ng the next three months when the evaluations and installation of adequate overp ressure protection shall be completed. Once the plan has been fully implemented, the employer must submit certification of its full compliance with the standard .