Translate
Violation Detail
Standard Cited: 19100305 C04 Wiring methods, components, and equipment for general use.
Inspection Nr: 1181782.015
Citation: 02007B
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/20/2017
Nr Instances: 1
Nr Exposed: 6
Abatement Date: 04/15/2017
Gravity: 10
Report ID: 0524700
Contest Date: 04/10/2017
Final Order: 02/28/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 02/28/2018 | $0.00 | 04/15/2017 | Repeat | |
| Penalty | C: Contested | 04/12/2017 | $0.00 | 03/31/2017 | Repeat | |
| Penalty | Z: Issued | 03/20/2017 | $0.00 | 03/31/2017 | Repeat |
Text For Citation: 02 Item/Group: 007B Hazard:
29 CFR 1910.305(c)(4): Snap switches mounted in boxes do not have faceplates installed so as to completely cover the opening and seat against the finished surface: The employer does not ensure employees are protected against electrical hazards in that a 110v light switch located inside the break room in the front building was not equipped with a cover. The violation was most recently observed on October 5, 2016. To abate the violations, the employer must ensure that electrical light switches are equipped with covers. A & D Wood Products, Inc. was previously cited for a violation of this Occupational Safety and Health Standard 1910.305(c)(4), which was contained in OSHA inspection number 993582, citation number 1, item number 11b and was affirmed as a final order on May 9, 2016 with respect to a workplace located at 112 Ward Street Elida, Ohio 45807.