Powered by GoogleTranslate

Violation Detail

Standard Cited: 19100305 B02 I Wiring methods, components, and equipment for general use.

Inspection Nr: 1181782.015

Citation: 02007A

Citation Type: Repeat

Abatement Status: Abatement Completed

Initial Penalty: $20,914.00

Current Penalty: $10,457.00

Issuance Date: 03/20/2017

Nr Instances: 3

Nr Exposed: 6

Abatement Date: 04/15/2017

Gravity: 10

Report ID: 0524700

Contest Date: 04/10/2017

Final Order: 02/28/2018

Related Event Code (REC):

Emphasis:


Penalty and Failure to Abate Event History
Type Latest Event Event Date Penalty Abatement Due Date Citation Type Failure to Abate Inspection
Penalty F: Formal Settlement 02/28/2018 $10,457.00 04/15/2017 Repeat  
Penalty C: Contested 04/12/2017 $20,914.00 03/31/2017 Repeat  
Penalty Z: Issued 03/20/2017 $20,914.00 03/31/2017 Repeat  

Text For Citation: 02 Item/Group: 007A Hazard:

29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings are not provided with covers approved for the purpose: a) The employer does not ensure that employees are protected from electrical hazards in that the 230v electrical box on the H & A Saws, Inc. manufactured swing cutoff saw is not provided with a cover. This violation was most recently reported to have occurred on October 4, 2016, when employees operated the saw. b) The employer does not ensure that employees are protected from electrical hazards in that the 110v junction box located on the inside of a doorway in the back building storage room is not provided with a cover. This violation was most recently observed on October 12, 2016. c) The employer does not ensure that employees are protected from electrical hazards in that the 110v outlet receptacle located inside the break room of the front building is not provided with a cover. This violation was most recently observed on October 5, 2016. To abate these violations, the employer must ensure that junction boxes, outlet receptacles, and electrical boxes are provided with covers. A & D Wood Products, Inc. was previously cited for a violation of this Occupational Safety and Health Standard 1910.305(b)(2)(i), which was contained in OSHA inspection number 1093537, citation number 1, item number 1 and was affirmed as a final order on December 17, 2015 with respect to a workplace located at 112 Ward Street Elida, Ohio 45807. A & D Wood Products, Inc. was previously cited for a violation of this Occupational Safety and Health Standard 1910. 305(b)(2)(i), which was contained in OSHA inspection number 993582, citation number 1, item number 11b and was affirmed as a final order on May 9, 2016 with respect to a workplace located at 112 Ward Street Elida, Ohio 45807.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close