Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 314767104
Citation: 02007
Citation Type: Other
Abatement Date: 03/31/2011 X
Initial Penalty: $1,000.00
Current Penalty: $1,000.00
Issuance Date: 03/14/2011
Nr Instances: 2
Nr Exposed: 12
Related Event Code (REC):
Gravity: 03
Report ID: 0625700
Contest Date: 04/04/2011
Final Order: 04/11/2012
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 03/14/2011 | $1,000.00 | Other |
Text For Citation: 02 Item/Group: 007 Hazard: REFINERY
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation ex poses employees to injury, was not guarded. a) The employer does not provide a g uard over the rotating drill bit of an Allen-Bradley (A-B) drill press, model no . 6790-3, serial no. 33414. The drill press was used to cut holes in metal stock . This violation was observed on or about September 20, 2010 on the north side o f the maintenance shop. b) The employer does not provide a guard over the rotating drill bit of a Wilton drill press. The drill press was used to drill holes in metal plates. This viol ation was observed on or about September 20, 2010 on the north wall of the pump shop. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date o f this citation, the employer must submit documentation showing that it is in co mpliance with the standard, including steps that it is taking to ensure that emp loyees are not being exposed to point of operation hazards.