Translate
Violation Detail
Standard Cited: 19100305 G02 II Wiring methods, components, and equipment for general use.
Inspection Nr: 1051081.015
Citation: 02006
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/12/2015
Nr Instances: 3
Nr Exposed: 12
Abatement Date: 06/01/2015
Gravity:
Report ID: 0626600
Contest Date:
Final Order: 06/02/2015
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/02/2015 | $0.00 | 06/01/2015 | Other | |
| Penalty | Z: Issued | 05/12/2015 | $0.00 | 06/01/2015 | Other |
Text For Citation: 02 Item/Group: 006 Hazard:
29 CFR 1910.305(g)(2)(ii): Flexible cords were not used only in continuous lengths without splice or tap: The employer does not use flexible cords in continuous use without splice or tap. a. This violation occurred on or about April 1, 2015, and times prior thereto, where employees on the east side at or near a 48 inch Lodge and Shipley lathe used an overhead lamp assembly without the electrical cord being free of splices. b. This violation occurred on or about April 1, 2015, and times prior thereto, where employees on the west side at or near a 25 inch Lodge and Shipley lathe operated a pedestal fan without the electrical cord being free of splices. c. This violation occurred on or about April 1, 2015, and times prior thereto, where employees in the rear of the shop area at or near a Hydraulic press used an overhead lamp assembly without the electrical cord being free of splices. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that flexible cords were not used only in continuous lengths without splice or tap.