Text For Citation: 02 Item/Group: 005 Hazard:

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Soldering Room, Soldering Oven, on or about 4/25/17: Moving table and paste guns and pinch points were not guarded at the paste station in that the light curtains were deactivated and the two hand trips did not prevent entry into the danger zone. b) Machine Shop, on or about 4/25/17: Ingoing nip points and pinch points at the cables and pulleys for the bar feeder on Brown & Sharpe screw machines #12, 13, 17, 19 were not guarded. c) Machine Shop, on or about 4/27/17: Pinch points at the clamping device for the deburring wheel on Brown & Sharpe screw machines # 13 and 17 were not guarded. d) Ammo Dept., Marker Area, on or about 5/4/17: Ingoing nip points and pinch points created by the feeder device that advances the bottle into the indexing table for Marker #1 and Marker #2 were not guarded. Abatement documentation must be submitted for instance c. The Crosman Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard, which was contained in OSHA inspection number 283828, citation number 1, item number 8 and was affirmed as a final order on 3/4/13, with respect to a workplace located at 7629 Routes 5 & 20, Bloomfield, NY 14469.