Translate
Violation Detail
Standard Cited: 19100147 C06 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1133070.015
Citation: 02005
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $68,591.00
Current Penalty: $39,000.00
Issuance Date: 09/07/2016
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 10/11/2016
Gravity: 10
Report ID: 0418100
Contest Date:
Final Order: 09/21/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/21/2016 | $39,000.00 | 10/11/2016 | Repeat | |
| Penalty | Z: Issued | 09/07/2016 | $68,591.00 | 10/11/2016 | Repeat |
Text For Citation: 02 Item/Group: 005 Hazard:
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Throughout the Plant - On or about 03/08/16 and at times prior thereto employees performed repairs, maintenance and re-tooling of equipment under lockout/tagout procedures which include (but are not limited to): Airlay #3 Bale Breakers, Resin Application Feed 1 and 2 (04/21/09). Airlay #3 Mac Filter Unit (04/21/09). Airlay #3 Bruno Press (04/21/09). Airlay #3 Slitter (04/21/09). Airlay #3 Regrinder (04/21/09). Airlay #3 Resin Applicator (04/21/09). Airlay Line (03/11/14). Bale Breaker 1 and 2 03/11/14). Trash Compactor 1 and 2 (03/11/14). DS Baler (09/03/14). Foam Clamp 1-3 (03/11/14). Foil Press (03/11/14). Hard Layer Press and Oven (03/11/14). Press 2-10 (03/11/14). Oven on Press 2 and 3 (03/11/14). Oven on Press 1 (03/11/14). Oven on Press 2 and 3 (03/11/14). Presses 1 to 3 (03/11/14). Presses 4-6 (03/11/14). Presses 7-10 (03/11/14). Oven on Press 13 (03/11/14). Press 14 (03/11/14). Subaru (03/11/14). T300 Dash (03/11/14). T300 Hood (03/11/14). The employer did not conduct periodic and at least annual inspections of the written lockout/tagout procedures. Workers were exposed to electrical energy, steam, compressed air, hydraulic energy, hot surfaces and fluids, potential (gravitational) energy, crushes and amputations. HP Pelzer Automotive Systems, Inc. was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard 29 CFR 1910.147(c)(6)(i), which was contained in OSHA inspection number 924666, citation number 1, item number 7, issued on 01/28/2014 and affirmed as a final order on 02/20/2014, with respect to a workplace located at 1884 Warrenton Hwy, Thomson, GA 30824. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.