Translate
Violation Detail
Standard Cited: 19100219 D01 Mechanical power-transmission apparatus.
This violation item has been deleted.
Inspection Nr: 1675035.015
Citation: 02004B
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 11/27/2023
Nr Instances: 1
Nr Exposed: 3
Abatement Date:
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 12/19/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/19/2023 | $0.00 | Serious | ||
| Penalty | Z: Issued | 11/27/2023 | $0.00 | Serious |
Text For Citation: 02 Item/Group: 004B Hazard:
29 CFR 1910.219(d)(1): Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes: On or about June 6, 2023, at the establishment located at 238648 State Highway 107N, Marathon, WI, the belts and pulleys were not enclosed on the Amp Air Moving Products Air Compressor Model X103-C45A-120H Serial # P3385124) located near the rotating drum in the Line 1 Building.