Text For Citation: 02 Item/Group: 004B Hazard:

29 CFR 1910.147(c)(5)(ii)(D): Lockout devices and tagout devices did not indicate the identity of the employee applying the device(s): Employees engaged in repairing, replacing, operating, inspecting, testing, and maintaining activities of covered process equipment at the engine rooms were exposed to electrical, struck-by and caught-between hazards in that the tagout devices did not indicate the identity of the employee applying the devices. The following was noted during the walk around: (a) CP2 CREPACO Compressor #8 with reference to the hand valve HV01 K12767/C8, HV02 K12767/C8, and HV12 K12767/C8, a tagout device to isolate the compressor was observed not having any identity, date, department, remarks, reasons for applying the tag. (b) CP2 K12767 TOMCC-915-22-01, a tagout device to isolate the compressor was observed not having any identity. (c) CP2 Exhaust Fan over Small Compressor Room, TOMCC-916-12-01 VEX-108, jacket pump #1, a tagout device to isolate the compressor was observed not having any identity. (d) CP2 Fed From TODP-916-07, 480V, a tagout device to isolate the compressor was observed not having any identity. 29 CFR 1903.19(d)(1) requires certification and documentation that the abatement of the above violation is complete. The Schwan's Global Supply Chain Inc. was previously cited for a violation of this Occupational Safety and Health Standard or its equivalent standard 29 CFR 1910.147(c)(5)(ii)(D), which was contained in OSHA inspection number 1213761, citation number 1, item number 13b and was affirmed as a final order on 9/14/2017, with respect to a workplace located at 3019 Scanlan Avenue Salina, KS 67401.