Translate
Violation Detail
Standard Cited: 19100219 E01 I Mechanical power-transmission apparatus.
This violation item has been deleted.
Inspection Nr: 1442637.015
Citation: 02004B
Citation Type: Repeat
Abatement Status:
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 02/12/2020
Nr Instances: 2
Nr Exposed: 15
Abatement Date: 03/10/2020
Gravity: 10
Report ID: 0418100
Contest Date:
Final Order: 03/06/2020
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/06/2020 | $0.00 | 03/10/2020 | Repeat | |
| Penalty | Z: Issued | 02/12/2020 | $0.00 | 03/10/2020 | Repeat |
Text For Citation: 02 Item/Group: 004B Hazard:
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: On or about November 5, 2019, and at times prior to, a) McT Hot Seal Operator, SN CM 169680: The employer did not ensure the v-belt of the belt and pulley system was guarded. The operator guides bags of product through the machine to be hot sealed, exposing the employee to amputations and caught in between hazards. b) Line III - In the production area, employees were exposed to an ingoing nip points from the horizontal located less than the ground, when the control panel was moved and exposed an opening on the line for access, on or about 11/5/19. Garick, LLC. was previously cited for a violation of an equivalent Occupational Safety and Health Standard 1910.219(e)(1)(i), which was contained in OSHA inspection number 1374883, citation 1, item 7b issued May 3 2019 and was affirmed as a final order on July 2, 2019, with respect to a workplace located at 370 Dennis Station Rd. SW, Eatonton, GA 31024.