Text For Citation: 02 Item/Group: 004B Hazard:

29 CFR 1910.303(b)(7)(iv): Equipment with damaged parts that may adversely affect its safe operation or its mechanical strength, such as broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating parts was used: a) Northeast Corner of the Facility- On February 1, 2016, the employer failed to ensure all electrical equipment was in good repair. The conduit and switchgear in the northeast corner of the facility showed outward signs of damage, including corrosion. b) Jessup Line- On February 1, 2016, the employer failed to ensure all electrical equipment was in good repair. The outlet and conduit near the Scrubber Discharge Tank and Rectifier T-698, showed outward signs of damage, including corrosion. c) Hand Line 2- On February 1, 2016, the employer failed to ensure all electrical equipment was in good repair. The outlet and conduit above Tank 612 of Acid Copper showed outward signs of damage, including corrosion. d) Strip Line- On or about Feb. 12, 2016, the employer failed to ensure all electrical equipment was in good repair. The conduit running along the north side of the Strip Line enclosure showed outward signs of damage, including corrosion. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.