Violation Detail
Standard Cited: 19260503 A01 Training requirements.
Inspection Nr: 1725906.015
Citation: 02004
Citation Type: Repeat
Abatement Status: Not Completed - Worksite Changed
Initial Penalty: $30,422.00
Current Penalty: $30,422.00
Issuance Date: 08/01/2024
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 08/27/2024
Gravity: 5
Report ID: 0317300
Contest Date:
Final Order: 08/27/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 08/01/2024 | $30,422.00 | 08/27/2024 | Repeat |
Text For Citation: 02 Item/Group: 004 Hazard:
29 CFR 1926.503(a)(1): The employer did not train each employee who might be exposed to fall hazards to enable them to recognize fall hazards and the procedures to be followed in order to minimize these hazards: a) 382-393 Nicker Jack Way, Chatham Bay, Dover, DE 19901: On or about February 5, 2024, the employer did not instruct employees on the recognition and avoidance of fall hazards including applicable regulations in construction. Abatement Note: The training program must enable the employees to recognize the hazards of falling and must train each employee in the procedures to be followed in order to minimize these hazards. Each employee must be trained by a competent person in the following: 1. The nature of fall hazards in the work area; 2. The correct procedures for erecting, maintaining, disassembling, and inspecting the fall protection systems to be used; 3. The use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used; 4. The role of each employee in the safety monitoring system when this system is used; 5. The limitations on the use of mechanical equipment during the performance of roofing work on low-sloped roofs; 6. The correct procedures for the handling and storage of equipment and materials and the erection of overhead protection; 7. The role of employees in fall protection plans; 8. The standards contained in this subpart. The employer must verify compliance with paragraph (a) of this section by preparing a written certification record that will contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. The Road Contractor Corp was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.503(a)(1), which was contained in OSHA inspection number 1686108, citation number 1, item number 3 and was affirmed as a final order on 10/2/2023, with respect to a workplace located at 116 Main Street Middletown, DE 19709.
Translate