Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1123267.015
Citation: 02004
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $34,650.00
Current Penalty: $12,471.00
Issuance Date: 07/15/2016
Nr Instances: 9
Nr Exposed: 11
Abatement Date: 07/27/2016
Gravity: 10
Report ID: 0418600
Contest Date:
Final Order: 08/04/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/04/2016 | $12,471.00 | 07/27/2016 | Serious | |
| Penalty | Z: Issued | 07/15/2016 | $34,650.00 | 07/27/2016 | Repeat |
Text For Citation: 02 Item/Group: 004 Hazard:
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: a) JFA line Crimper SG-12; On or about January 26, 2016 and at time prior thereto, the employer exposed employees to crush-by and amputation hazards in that the point of operation was not effectively guarded. b) UMA 1 line Crimper SG-04; On or about January 26, 2016 and at time prior thereto, the employer exposed employees to crush-by and amputation hazards in that the point of operation was not effectively guarded. c) UMA 2 line Crimper SG-06; On or about January 26, 2016 and at time prior thereto, the employer exposed employees to crush-by and amputation hazards in that the point of operation was not effectively guarded. d) Fabrication Department Endformer 1 (EF-01); On or about January 26, 2016 and at time prior thereto, the employer exposed employees to crush-by and amputation hazards in that the point of operation was not guarded. e) AN line Crimper SG-15; On or about January 26, 2016 and at time prior thereto, the employer exposed employees to crush-by and amputation hazards in that the point of operation was not effectively guarded. f) AN line Crimper SG-16; On or about January 26, 2016 and at time prior thereto, the employer exposed employees to crush-by and amputation hazards in that the point of operation was not effectively guarded. g) UMA2 line Crimper SG-09; On or about January 26, 2016 and at time prior thereto, the employer exposed employees to crush-by and amputation hazards in that the point of operation was not effectively guarded. h) LFA line Crimper SG-07; On or about January 26, 2016 and at time prior thereto, the employer exposed employees to crush-by and amputation hazards in that the point of operation was not effectively guarded. i) LFA line Crimper SG-08; On or about January 26, 2016 and at time prior thereto, the employer exposed employees to crush-by and amputation hazards in that the point of operation was not effectively guarded. PYONGSAN AMERICA, INC. WAS PREVIOUSLY CITED FOR A VIOLATIONOF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.212(a)(3)(ii), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 635098, CITATION NUMBER 1, ITEM NUMBER 1 AND WAS AFFIRMED AS A FINAL ORDER ON FEBRUARY 7, 2013, WITH RESPECT TO A WORKPLACE LOCATED AT 760 WEST VETERAN'S BLVD, AUBURN AL 36830. PYONGSAN AMERICA, INC. WAS PREVIOUSLY CITED FOR A VIOLATIONOF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.212(a)(3)(ii), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 316387562, CITATION NUMBER 2, ITEM NUMBER 2 AND WAS AFFIRMED AS A FINAL ORDER ON AUGUST 10, 2012, WITH RESPECT TO A WORKPLACE LOCATED AT 760 WEST VETERAN'S BLVD, AUBURN AL 36830.