Text For Citation: 02 Item/Group: 003A Hazard:

29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work and work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one-eighth inch: a) On Highway differential cell: The work rest on DeWalt Bench Grinder model DW756 serial number 2013 33-YL 90500 measured ¾ inches, on or about 8/30/16. b) On Highway differential cell: The right and left work rests on a DeWalt Bench Grinder model DW756 serial number 2013 30-YL 89482 measured greater than one eighth inches, on or about 10/27/16. c) On Highway mid-range cell: A DeWalt Bench Grinder model DW756 serial number 2013 30-YL89483 did not have a work rest, on or about 10/27/16. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19. Transaxle LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.215(a)(4), which was contained in OSHA inspection number 764301, citation number 1, item number 6a and was affirmed as a final order on 2/22/13, with respect to a workplace located at 2501 Route 73 South Cinnaminson, NJ 08077.