Translate
Violation Detail
Standard Cited: 19100303 F01 General.
Inspection Nr: 1817171.015
Citation: 02003
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 08/13/2025
Nr Instances: 3
Nr Exposed: 20
Abatement Date:
Gravity:
Report ID: 0419700
Contest Date:
Final Order: 09/04/2025
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/04/2025 | $0.00 | Other | ||
| Penalty | Z: Issued | 08/13/2025 | $0.00 | Other |
Text For Citation: 02 Item/Group: 003 Hazard:
29 CFR 1910.303(f)(1): Each disconnecting means required by Subpart S of Part 1910 for motors and appliances was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: a. In the shop area, at 291 Springview Commerce Drive, Debary, Florida: On or about April 8, 2025, the employer exposed employees to struck by hazards, in that electrical wiring disconnecting the motor for the 12-foot collapsible cantilever mandrel was not identified for employees during fabrication work. b. In the shop area, at 291 Springview Commerce Drive, Debary, Florida: On or about April 8, 2025, the employer exposed employees to struck by hazards, in that electrical wiring disconnecting the motor for the small collapsible cantilever mandrel was not identified for employees during fabrication work. c. In the shop area, at 291 Springview Commerce Drive, Debary, Florida: On or about April 8, 2025, the employer exposed employees to struck by hazards, in that electrical wiring disconnecting the control panel of the collapsible cantilever mandrel was not identified for employees during fabrication work.