Translate
Violation Detail
Standard Cited: 19100303 G01 I B General.
Inspection Nr: 1669030.015
Citation: 02003
Citation Type: Other
Abatement Date: 09/27/2023 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/19/2023
Nr Instances: 3
Nr Exposed: 11
Related Event Code (REC):
Gravity:
Report ID: 0418600
Contest Date:
Final Order: 10/16/2023
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/16/2023 | $0.00 | 09/27/2023 | Other | |
| Penalty | Z: Issued | 09/19/2023 | $0.00 | 09/27/2023 | Other |
Text For Citation: 02 Item/Group: 003 Hazard:
29 CFR 1910.303(g)(1)(i)(B): For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the width of the working space in front of electrical equipment was less than the width of the equipment or 762 mm (30 inches), whichever was greater: a) Fabrication Department (Plasma Table Area/Fixed Dust Abatement Tube): On or about May 08, 2023, and times prior, the employer failed to keep a clear an unobstructed path of at least 762 mm (30 inches) in front of an electrical safety (knife) switch box was not kept for employees use during an emergency response. b) Fabrication Department (Hypertherm Area): On or about May 08, 2023, and times prior, the employer failed to keep a clear an unobstructed path of at least 762 mm (30 inches) in front of an electrical safety (knife) switch box was not kept for employees use during an emergency response. c) Fabrication Department (Quincy Compressor Area): On or about May 08, 2023, and times prior, the employer failed to keep a clear an unobstructed path of at least 762 mm (30 inches) in front of an electrical safety (knife) switch box was not kept for employees use during an emergency response.