Translate
Violation Detail
Standard Cited: 19100305 G01 IV A Wiring methods, components, and equipment for general use.
Inspection Nr: 1196140.015
Citation: 02003
Citation Type: Other
Abatement Date: 1
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 06/07/2017
Nr Instances: 2
Nr Exposed: 6
Related Event Code (REC):
Gravity:
Report ID: 0418100
Contest Date:
Final Order: 06/30/2017
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/30/2017 | $0.00 | Other | ||
| Penalty | Z: Issued | 06/07/2017 | $0.00 | Other |
Text For Citation: 02 Item/Group: 003 Hazard:
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a. On or about 2/9/2017 at the wire cutting shop the employer failed to provide permanent wiring to the metallic quad outlet used to power a Milwaukee 4 1/2" hand grinder, Ryobi 14.4 V charger, and Milwaukee 18 V charger exposing workers to shock and burn hazards. b. On or about 2/9/2017 at the machine shop the employer failed to provide permanent wiring where an orange extension cord was powered by a re-locatable power tap. The orange cord was ran through the overhead piping to deliver power to the workbench across the shop. The cord was used as a drop and was not in use at the time but the Milwaukee 4 1/2" hand grinder, Intertek 3 1/2" cutter, and Jet 8" bench grinder cords were all in the immediate proximity to the orange cord.