Translate
Violation Detail
Standard Cited: 19100178 Q07 Powered industrial trucks.
Inspection Nr: 1167508.015
Citation: 02003
Citation Type: Other
Abatement Date: 11/22/2016 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 10/24/2016
Nr Instances: 2
Nr Exposed: 12
Related Event Code (REC): C
Gravity:
Report ID: 0521400
Contest Date:
Final Order: 11/22/2016
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/22/2016 | $0.00 | 11/22/2016 | Other | |
| Penalty | Z: Issued | 10/24/2016 | $0.00 | 11/22/2016 | Other |
Text For Citation: 02 Item/Group: 003 Hazard:
29 CFR 1910.178(q)(7): Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily. Where industrial trucks are used on a round-the-clock basis, they shall be examined after each shift. Defects when found shall be immediately reported and corrected. Throughout facility - On or about February 24, 2014, employees (full-time / temporary) were required to operate powered industrial vehicles in the performance of their duties. The employer did not perform an examination of the Mitsubishi model FB18PNT, serial number EFB2600385 / Mitsubishi model FBC25N2, Serial number AFB3050344, to check for defects prior to / or after each shift, thereby exposing employees to struck by hazards.