Translate
Violation Detail
Standard Cited: 19100147 C06 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1130513.015
Citation: 02003
Citation Type: Repeat
Abatement Status: Not Completed - Employer Out of Business
Initial Penalty: $10,975.00
Current Penalty: $10,975.00
Issuance Date: 08/30/2016
Nr Instances: 1
Nr Exposed: 4
Abatement Date: 09/09/2016
Gravity: 10
Report ID: 0215800
Contest Date:
Final Order: 09/28/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 08/30/2016 | $10,975.00 | 09/09/2016 | Repeat |
Text For Citation: 02 Item/Group: 003 Hazard:
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) At the establishment, on or about 3/14/16: No annual inspections were conducted of the lockout/tagout procedures to ensure that the procedures and requirements of the standard were being followed in that the last inspection was conducted on 7/9/14. Employees perform servicing and/or maintenance on various equipment, including, but not limited to mechanical power presses, spot welders, coil feeders, air dryers, air compressors, oven, etc. The York Metal Toll Processing, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard which was contained in OSHA inspection number 958980, citation number 1, item number 8 and was affirmed as a final order on 10/2/15, with respect to a workplace located at 8 Dwight Park Drive, Syracuse, NY 13209. Abatement documentation must be submitted for this item.