Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1121917.015
Citation: 02003
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $13,860.00
Current Penalty: $15,000.00
Issuance Date: 07/27/2016
Nr Instances: 4
Nr Exposed: 38
Abatement Date: 06/02/2017
Gravity: 10
Report ID: 0524200
Contest Date: 08/16/2016
Final Order: 05/08/2017
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/08/2017 | $15,000.00 | 06/02/2017 | Repeat | |
| Penalty | C: Contested | 08/26/2016 | $13,860.00 | 08/22/2016 | Repeat | |
| Penalty | Z: Issued | 07/27/2016 | $13,860.00 | 08/22/2016 | Repeat |
Text For Citation: 02 Item/Group: 003 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Flight Bar Maintenance Area- On February 1, 2016, the employer failed to ensure that the unused portion of the cutting blade on the DoAll Vertical Bandsaw, which was used to cut materials other than wood, was fully guarded and enclosed to protect employees during the operation of the machine. b) Maintenance Shop- On or about February 1, 2016, employer failed to ensure that the unused portions of the cutting blade on the Dayton Horizontal Bandsaw, which was used to cut materials other than wood, was fully guarded and enclosed to protect employees during the operation of the machine. c) Tube Buffing Room- On February 1, 2016, the employer failed to ensure that the spindle end on Buffing Machine #1 and Buffing Machine #2 was fully guarded and enclosed to protect employees during the operation of the machine. d) Polishing Department- On March 4, 2016, the employer failed to ensure that the spindle end on the Rite Speed & Chas Polishing Machine #6R was fully guarded and enclosed to protect employees during the operation of the machine. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records. Arlington Plating Company was previously cited for a violation of this Occupational Safety and Health Standard 1910.212(a)(1), which was contained in OSHA inspection number 929496, citation number 2, item number 2, and was affirmed as a final order on July 16, 2015, with respect to a workplace located at 600 S. Vermont Street in Palatine, Illinois.