Translate
Violation Detail
Standard Cited: 19100147 D04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1043996.015
Citation: 02002B
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 08/20/2015
Nr Instances: 5
Nr Exposed: 3
Abatement Date: 10/07/2015
Gravity: 5
Report ID: 0522300
Contest Date:
Final Order: 09/11/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/11/2015 | $0.00 | 10/07/2015 | Repeat | |
| Penalty | Z: Issued | 08/20/2015 | $0.00 | 10/07/2015 | Willful |
Text For Citation: 02 Item/Group: 002B Hazard:
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a) On or about the week of April 8, 2015, in the forge Shop located at 53 Freedom Rd., Painesville, Ohio 44077, lockout procedures were not utilized during setup and dies changes on the 3 inch National Upsetter. The electrical, hydraulic, and gravitational energy sources were not locked out. b) On or about the week of March 1, 2015, in the forge Shop located at 53 Freedom Rd., Painesville, Ohio 44077, lockout procedures were not utilized during setup and dies changes on the 750 ton HPM hydraulic press. The electrical, hydraulic, and gravitational energy sources were not locked out. c) On or about April 9, 2015, in the forge Shop located at 53 Freedom Rd., Painesville, Ohio 44077, 44077, lockout procedures were not utilized during setup and dies changes on the 150 ton Maxi Press. The pneumatic energy source was not locked out. d) On or about April 9, 2015, in the forge Shop located at 53 Freedom Rd., Painesville, Ohio 44077, lockout procedures were not utilized during blade changes on the Horizontal Cantilever Band Saw (end). The electrical, hydraulic, and gravitational energy sources were not locked out. e) On or about April 9, 2015, in the forge Shop located at 53 Freedom Rd., Painesville, Ohio 44077, lockout procedures were not utilized during blade changes on the Horizontal Cantilever Band Saw (middle). The electrical, hydraulic, and gravitational energy sources were not locked out.