Translate
Violation Detail
Standard Cited: 19261408 A02
Inspection Nr: 777302.015
Citation: 02002
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $69,300.00
Current Penalty: $53,000.00
Issuance Date: 05/31/2013
Nr Instances: 1
Nr Exposed: 7
Abatement Date: 06/03/2013
Gravity: 10
Report ID: 0214700
Contest Date: 06/17/2013
Final Order: 01/21/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 01/21/2015 | $53,000.00 | 06/03/2013 | Repeat | |
| Penalty | C: Contested | 06/21/2013 | $69,300.00 | 06/03/2013 | Willful | |
| Penalty | Z: Issued | 05/31/2013 | $69,300.00 | 06/03/2013 | Willful |
Text For Citation: 02 Item/Group: 002 Hazard:
29 CFR 1926.1408(a)(2): The employer did not determine if any part of the equipment, load line or load (including rigging and lifting accessories), if operated up to the equipment's maximum working radius in the work zone, could get closer than 20 feet to a power line. (a) Worksite, east side of building, third floor - Employees hoisted and set precast concrete floor planks with a Liebherr Mobile Crane, Model # LTM 1220-5.2 268 Ton, Serial # 070 495, where the rigging came within approximately 8 feet of the overhead primary and secondary power lines operating up to 13,200 volts (13 Kv) phase to phase, on or about December 1, 2012. Note: In addition to abatement certification, the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.