Translate
Violation Detail
Standard Cited: 19100305 G01 IV A Wiring methods, components, and equipment for general use.
Inspection Nr: 1607041.015
Citation: 02002
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $465.00
Current Penalty: $232.50
Issuance Date: 11/02/2022
Nr Instances: 5
Nr Exposed: 17
Abatement Date: 05/02/2023
Gravity:
Report ID: 0111100
Contest Date:
Final Order: 11/17/2022
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/17/2022 | $232.50 | 05/02/2023 | Other | |
| Penalty | Z: Issued | 11/02/2022 | $465.00 | 05/02/2023 | Other |
Text For Citation: 02 Item/Group: 002 Hazard:
29 CFR 1910.305(g)(1)(iv)(A):Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: Establishment: The employer did not ensure permanent wiring was installed to prevent extension cords from being used as permanent wiring in the following areas a) Quality control shop: extension cords were used from the bandsaw and two milling machines to outlets 1-4 feet from the equipment. b) Main shop: an extension cord was run up a wall and to the left of the door to power a vent fan. c) Air compressor room: an extension cord was run up the wall and near the fixed ladder powering the compressor.