Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1504116.015
Citation: 02002
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $17,555.00
Current Penalty: $13,000.00
Issuance Date: 01/28/2021
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 02/24/2021
Gravity: 5
Report ID: 0522300
Contest Date:
Final Order: 03/01/2021
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/01/2021 | $13,000.00 | 02/24/2021 | Serious | |
| Penalty | Z: Issued | 01/28/2021 | $17,555.00 | 02/24/2021 | Repeat |
Text For Citation: 02 Item/Group: 002 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): On or about 11/20/20, the employer failed to ensure that the Machine # TF-9, LI/Lyle Industries Thermoformer Serial No. LM 4073 had adequate machine guarding in place. On the exit side of the Thermoformer, the shear guard had an opening at the bottom that was about 41" from the point of operation. The width of the opening was about 58", and the guard was about 44" off of the ground, allowing it to be easily bypassed. Landmark Plastic Corporation was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.212(a)(3)(ii), which was contained in OSHA inspection number 1415958, citation number 1, item number 2a and was affirmed as a final order on 1/14/2020 , with respect to a workplace located at 1331 Kelly Avenue, Akron, Ohio.