Translate
Violation Detail
Standard Cited: 19100213 H05 Woodworking machinery requirements.
Inspection Nr: 1482751.015
Citation: 02002
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 10/15/2020
Nr Instances: 1
Nr Exposed: 6
Abatement Date: 11/10/2020
Gravity:
Report ID: 0418300
Contest Date:
Final Order: 11/06/2020
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/06/2020 | $0.00 | 11/10/2020 | Other | |
| Penalty | Z: Issued | 10/15/2020 | $0.00 | 11/10/2020 | Other |
Text For Citation: 02 Item/Group: 002 Hazard:
29 CFR 1910.213(h)(5): The direction of the saw rotation was not conspicuously marked on the hood and a permanent label, measuring not less than 1.5 inches by 0.75 inches, was not affixed to the rear of the guard, approximately at the same level of the arbor, reading: "Danger: Do Not Rip or Plough From This End": (a) On or about July 08, 2020 - Truss department, the Speed Saw did not have the correct labels/markings as required by OSHA standards. There was no marking indicating the direction of saw rotation. The Ripping/Ploughing warning label was not worded as required by OSHA and not located as required by OSHA.