Text For Citation: 02 Item/Group: 002 Hazard:

29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards. (a) Materials Center, Coater Line CO-6/4614: Employees were exposed to machine hazards associated moving machine parts and in-going nip points while they cleaned the top pan "catch tray" from excessive drips exposing them to unguarded, high speed rollers during the normal production mode of operation, on or about 9/26/2019. (b) Materials Center, Coater Line CO-6/4614: Employees were exposed to machine hazards associated moving machine parts and in-going nip points while they cleaned outgoing belts which feed the conveyor which leads to the oven, on or about 9/26/2019. (c) Materials Center, Coater Line CO-6/4614: Employees were exposed to machine hazards associated moving machine parts and in-going nip points while they changed out rollers on the machine, on or about 9/26/2019. (d) Materials Center, Coater Line CO-6/4614: Employees had the potential to be exposed to machine hazards associated with moving machine parts and in-going nip points while they unjammed sheets of metal, on or about 10/4/2019. BWAY CORPORATION WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD 1910.147(d), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1221402 CITATION NUMBER 1, ITEM NUMBER 1 AND WAS AFFIRMED AS A FINAL ORDER ON 2/6/2019, WITH RESPECT TO A WORKPLACE LOCATED AT 3200 S. KILBOURN AVE, CHICAGO, IL 60623 BWAY CORPORATION WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD 1910.147(d), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1236802 CITATION NUMBER 1, ITEM NUMBER 1 AND WAS AFFIRMED AS A FINAL ORDER ON 2/6/2019, WITH RESPECT TO A WORKPLACE LOCATED AT 3200 S. KILBOURN AVE, CHICAGO, IL 60623 BWAY CORPORATION WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD 1910.147(d), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1214707 CITATION NUMBER 1, ITEM NUMBER 1 AND WAS AFFIRMED AS A FINAL ORDER ON 2/6/2019, WITH RESPECT TO A WORKPLACE LOCATED AT 3200 S. KILBOURNE AVE, CHICAGO, IL 60623 BWAY CORPORATION WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD 1910.147(d), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1215160 CITATION NUMBER 1, ITEM NUMBER 4c AND WAS AFFIRMED AS A FINAL ORDER ON 8/28/2017, WITH RESPECT TO A WORKPLACE LOCATED AT 10277 VENICE AVENUE, STURTEVANT, WI 53177 BWAY CORPORATION WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD, ITS EQUIVALENT, OR ESSENTIALLY SIMILAR STANDARD 1910.147(d)(3), WHICH WAS CONTAINED IN OSHA OSHA INSPECTION NUMBER 1121022 CITATION NUMBER 1, ITEM NUMBER 2 AND WAS AFFIRMED AS A FINAL ORDER ON 5/3/2016, WITH RESPECT TO A WORKPLACE LOCATED AT 1410 BLATT BOULEVARD, GAHANNA, OH 43230 NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.