Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1322205.015
Citation: 02002
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $71,137.00
Current Penalty: $35,568.50
Issuance Date: 10/23/2018
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 11/19/2018
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 11/19/2018
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/19/2018 | $35,568.50 | 11/19/2018 | Repeat | |
| Penalty | Z: Issued | 10/23/2018 | $71,137.00 | 11/19/2018 | Repeat |
Text For Citation: 02 Item/Group: 002 Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: (a) On or about May 31 2018, an employee performing a changeover on the ZED No. 0411 Thermoformer were not required to: physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the electric, hydraulic, pneumatic, thermal and gravity energy sources, affix lockout or tagout devices to each energy isolating device, use safety blocks or verify lockout. The Industry Products Co. was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.147(d), which was contained in OSHA inspection number 1192509, citation number 1, item number 3 and was affirmed as a final order on March 15, 2017, with respect to a workplace located at 500 Statler Road, Piqua, Ohio, 45356.