Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1077467.015
Citation: 02002
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $69,300.00
Current Penalty: $1,000.00
Issuance Date: 12/24/2015
Nr Instances: 50
Nr Exposed: 30
Abatement Date: 10/01/2016
Gravity: 10
Report ID: 0729300
Contest Date:
Final Order: 01/21/2016
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $1,000.00 | 10/01/2016 | Serious | ||
| Penalty | I: Informal Settlement | 01/21/2016 | $1,000.00 | 06/01/2016 | Serious | |
| Penalty | Z: Issued | 12/24/2015 | $69,300.00 | 02/12/2016 | Willful |
Text For Citation: 02 Item/Group: 002 Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Inside of the Main Building, the two, vertical, rotating feeders providing rough raw steel product to the following production machines were not guarded: a/ Kieserling Line. b/ Schumag Line. c/ Danieli Line. Inside of the Main Building, the reciprocating machine parts at various locations throughout the lengths of the following production machines where the operators and other employees work were inadequately guarded or not at all: a/ Kieserling Line. b/ Schumag Line. c/ Danieli Line. Inside of the Main Building, the in-running nip points at various locations throughout the lengths of the following production machines where the operators and other employees work were inadequately guarded or not at all: a/ Kieserling Line. b/ Schumag Line. c/ Danieli Line. Inside Building #2, specifically at the base of the "Wheelabrator" the rotating parts of the following machine were unguarded: a/ Auger. Inside of the Tool & Die Room, the rotating parts belonging to the following machines were not guarded: a/ Die Quip Lathe, m/n DQB66, s/n B06-223. b/ Schuer Speed Lathe, m/n LAZB, s/n 40674M. c/ Schuer Speed Lathe, unknown m/n or s/n. Inside of the Machine Shop, the rotating parts belonging to the following machines were not guarded: a/ JET Manual Lathe, s/n GH-1460ZX. b/ HDI Heavy-Duty Drill Press, m/n DP-56, s/n 251. c/ Kalamazoo Horizontal Band Saw, m/n H9AW, s/n 8865. d/ OOYA Radial Arm Drill, m/n RE-1225M, s/n 69-9543. Inside of the Twenty Ton Line, two, vertical, rotating feeders providing rough raw steel product were unguarded. Inside of the Twenty Ton Line, the robotic arm feeding rough raw steel product into this production line was inadequately guarded. Inside of the Twenty Ton Line, five, vertical, in-running nip points were inadequately guarded.