Violation Detail
Standard Cited: 19100134 K03 Respiratory Protection.
Inspection Nr: 1703194.015
Citation: 02001D
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/21/2024
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 04/22/2024
Gravity: 5
Report ID: 0213600
Contest Date: 04/05/2024
Final Order: 08/01/2024
Related Event Code (REC):
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | F: Formal Settlement | 08/01/2024 | $0.00 | 04/22/2024 | Repeat | |
Penalty | C: Contested | 04/09/2024 | $0.00 | 04/22/2024 | Repeat | |
Penalty | Z: Issued | 03/21/2024 | $0.00 | 04/22/2024 | Repeat |
Text For Citation: 02 Item/Group: 001D Hazard:
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace: a) Container Painting Area - On or about 10/10/2023, employees were required by the employer to wear 3M half-mask air-purifying respirators while spray painting refuse containers. Training was not provided prior to requiring employees to use a respirator in the workplace. Employer shall ensure each employee can demonstrate knowledge of at least the following: * Why the respirator is necessary and how improper fit, usage, or maintenance can compromise the protective effect of the respirator; * What the limitations and capabilities of the respirator are; * How to use the respirator effectively in emergency situations, including situations in which the respirator malfunctions; * How to inspect, put on and remove, use, and check the seals of the respirator; * What the procedures are for maintenance and storage of the respirator; * How to recognize medical signs and symptoms that may limit or prevent the effective use of respirators; and the general requirements of this section. Fleet Genius, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard, which was contained in OSHA inspection number 1664817, citation number 1, item number 1d and was affirmed as a final order on 9/1/23.