Text For Citation: 02 Item/Group: 001B Hazard:

29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): A) On or about October 26, 2023, the hazardous electrical and pneumatic energies were not isolated on the Bread Pattern Former #3, and lockout devices were not affixed to each isolating device prior to an employee being exposed to caught-in hazards of moving parts when performing servicing/maintenance task such as adjusting the photo eye. B) On or about March 10, 2024, the hazardous electrical energy was not isolated on the Bun Slicer section of the Model 90 Autoload Machines on Bun Lines 2, and lockout devices were not affixed to the isolating device prior to employees being exposed to machine hazards when performing maintenance tasks such as removing and installing circular bun slicing blades during set-up or change-over. C) On or about March 14, 2024, the hazardous pneumatic energy was not adequately isolated on the Bun Line 2 Bagger Machine because a lockout device was not placed on the pneumatic energy isolating device prior to an employee being exposed to machine hazards when performing maintenance on an air cylinder. The Pan-O-Gold Baking Co. was previously cited for a violation of the equivalent Occupational Safety and Health Standards 29 CFR 1910.147(d)(2) and 29 CFR 1910.147(d)(3) which were contained in OSHA inspection number 1414346, citation number 1, item number 2a and citation number 1, item number 2b, and were affirmed as a final order on 11-22-2019, with respect to a workplace located at 1000 Wilburn Rd., Sun Prairie, WI 53590.