Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1504116.015
Citation: 02001B
Citation Type: Repeat
Abatement Status:
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 01/28/2021
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 02/24/2021
Gravity: 5
Report ID: 0522300
Contest Date:
Final Order: 03/01/2021
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/01/2021 | $0.00 | 02/24/2021 | Repeat | |
| Penalty | Z: Issued | 01/28/2021 | $0.00 | 02/24/2021 | Repeat |
Text For Citation: 02 Item/Group: 001B Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) covered the following elements, however, the actions were not done in sequence as required by 29 CFR 1910.147 (d)(1)-(6): On or about 11/20/20, the employer failed to ensure that employees clearing jams on the shear of Machine # TF-9, LI/Lyle Industries Thermoformer Serial No. LM 4073, utilized lockout/tagout procedures in accordance with 1910.147 (d)(1) through 1910.47(d)(6) as follows: 1) Prepare for shutdown, 2) Shutdown machine or equipment, 3) Machine/equipment isolation, 4) Apply lockout device(s), 5) Relieve potentially hazardous energy sources, and 6) Verify energy isolation. Landmark Plastic Corporation was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.147(c)(4)(i), which was contained in OSHA inspection number 1415958, citation number 2, item number 1 and was affirmed as a final order on 1/14/2020 , with respect to a workplace located at 1331 Kelly Avenue, Akron, Ohio.