Translate
Violation Detail
Standard Cited: 19100213 H02 Woodworking machinery requirements.
Inspection Nr: 1059123.015
Citation: 02001B
Citation Type: Repeat
Abatement Date: 09/25/2015 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/21/2015
Nr Instances: 10
Nr Exposed: 5
Related Event Code (REC):
Gravity: 10
Report ID: 0111700
Contest Date:
Final Order: 10/07/2015
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/07/2015 | $0.00 | 09/25/2015 | Repeat | |
| Penalty | Z: Issued | 09/21/2015 | $0.00 | 09/25/2015 | Repeat |
Text For Citation: 02 Item/Group: 001B Hazard:
29 CFR 1910.213(h)(2): Radial saw(s) used for ripping were not provided with nonkickback fingers or dogs located on both sides of the saw so as to oppose the trust or tendency of the saw to pick up material or throw it back toward the operator: Instance a. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 05045A) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance b. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N CD40024) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance c. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 350565) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance d. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 571317) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance e. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 640995) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance f. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 970901) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance g. Site - On or about April 28, 2015, and May 7, 2015, the Hitachi (model C10FSH S/N 356544) slide compound saw's vise assembly was not utilized to secure the workpiece and prevent cut materials from being thrown backwards towards the operator. Instance h. Site - On or about April 28, 2015, and May 7, 2015, the Omca (model RN450FM "US") radial arm saw was not provided with a non-kickback finger guard to prevent cut materials from being thrown backwards towards the operator. Instance i. Site - On or about April 28, 2015, and May 7, 2015, the Omca (model RN450FM "US" S/N 280662) radial arm saw was not provided with a non-kickback finger guard to prevent cut materials from being thrown backwards towards the operator. Instance j. Site - On or about April 28, 2015, and May 7, 2015, the Delta Rockwell (S/N 2556-B) radial arm saw was not provided with a non-kickback finger guard to prevent cut materials from being thrown backwards towards the operator. Vigilant Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910. 213(c)(3), which was contained in OSHA inspection number 966547, citation , number 1, item number 3a, and was affirmed as a final order on May 27, 2014, with respect to a workplace located at 85 Industrial Park Dr. Dover, NH.