Text For Citation: 02 Item/Group: 001A Hazard:

29 CFR 1910.147(c)(4)(i):Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section. a.) Dimensional Metals, Inc., at the jobsite located at 58 Klema Dr. North, Reynoldsburg, Ohio 43068: On and or/preceding March 15, 2022, the employer failed to utilize control of hazardous energy procedures while employees were engaged in servicing and maintenance activities, such as but not limited to lubricating and cleaning rollers on the flush panel roll former (model: CA-84-60-18-L-SP S/N: 19685.00). The employees performed these servicing and maintenance activities without receiving authorized employee level lockout/tagout training, thereby exposing employee to struck-by, caught-in, and amputation hazards. b.) Dimensional Metals, Inc., at the jobsite located at 58 Klema Dr. North, Reynoldsburg, Ohio 43068: On and or/preceding March 15, 2022, the employer failed to utilize control of hazardous energy procedures while employees were engaged in servicing and maintenance activities, such as but not limited to cleaning rollers on the Forstner CTL machine (model: RM-TSS S/N: 104887). The employees performed these servicing and maintenance activities without receiving authorized employee level lockout/tagout training, thereby exposing employee to struck-by, caught-in, and amputation hazards. c.) Dimensional Metals, Inc., at the jobsite located at 58 Klema Dr. North, Reynoldsburg, Ohio 43068: On and or/preceding March 15, 2022, the employer failed to utilize control of hazardous energy procedures while employees were engaged in servicing and maintenance activities, such as but not limited to cleaning, setting up and adjusting on the Schlebach roll former (model: SW25 S/N: SWI18-M1019). The employees performed these servicing and maintenance activities without receiving authorized employee level lockout/tagout training, thereby exposing employee to struck-by, caught-in, and amputation hazards. The Dimensional Metals, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(c)(4)(i), which was contained in OSHA inspection number 1511714, citation number 1, item number 1a and was affirmed as a final order on August 8, 2021, with respect to a workplace located at 58 Klema Dr. North, Reynoldsburg, Ohio 43068.