Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1305138.015
Citation: 02001A
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $129,336.00
Current Penalty: $82,245.00
Issuance Date: 09/07/2018
Nr Instances: 2
Nr Exposed: 2
Abatement Date: 06/15/2020
Gravity: 10
Report ID: 0524700
Contest Date: 09/24/2018
Final Order: 06/15/2020
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 06/15/2020 | $82,245.00 | 06/15/2020 | Repeat | |
| Penalty | C: Contested | 09/26/2018 | $129,336.00 | 09/18/2018 | Willful | |
| Penalty | Z: Issued | 09/07/2018 | $129,336.00 | 09/18/2018 | Willful |
Text For Citation: 02 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: A) Napoleon Spring Works, Inc., located at 111 Weires Drive, Archbold, OH 43502: On or about March 27, 2018, the employer did not ensure that employees utilized specific procedures to control hazardous energy on the left mandrel winder located in the Spring Department. Hazardous energy sources such as, but not limited to, electrical were not isolated prior to performing activities such as, but not limited to, changing mandrels/bars during set-up of the left mandrel winder. Employees performing set-up tasks in this condition were exposed to caught in hazards. B) Napoleon Spring Works, Inc., located at 111 Weires Drive, Archbold, OH 43502: On or about March 27, 2018, the employer did not ensure that employees utilized specific procedures to control hazardous energy on the right mandrel winder located in the Spring Department. Hazardous energy sources such as, but not limited to, electrical were not isolated prior to performing activities such as, but not limited to, changing mandrels/bars during set-up of the right mandrel winder. Employees performing set-up tasks in this condition were exposed to caught in hazards.