Translate
Violation Detail
Standard Cited: 19100213 H01 Woodworking machinery requirements.
Inspection Nr: 1059123.015
Citation: 02001A
Citation Type: Repeat
Abatement Date: 09/25/2015 2
Initial Penalty: $10,780.00
Current Penalty: $7,700.00
Issuance Date: 09/21/2015
Nr Instances: 3
Nr Exposed: 3
Related Event Code (REC):
Gravity: 10
Report ID: 0111700
Contest Date:
Final Order: 10/07/2015
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/07/2015 | $7,700.00 | 09/25/2015 | Repeat | |
| Penalty | Z: Issued | 09/21/2015 | $10,780.00 | 09/25/2015 | Repeat |
Text For Citation: 02 Item/Group: 001A Hazard:
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the stock being cut to give maximum protection possible for the operation being performed: Instance a. Site - On or about April 28, 2015, an employee assigned to operate the Omca (model RN450FM "US") radial arm saw suffered a serious finger injury, while operating the saw which had not been adequately guarded. Instance b. Site - On or about April 28, 2015, the Omca (model RN450FM "US" S/N 280662) radial arm saw's blade guard was not installed correctly to allow the guard to completely enclose the rotating blade during the operation of the saw. Instance c. Site - On or about April 28, 2015, the Delta Rockwell (S/N 2556-B) radial arm saw's blade guard was not installed correctly to allow the guard to completely enclose the rotating blade during the operation of the saw. Vigilant Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.213(c)(1), which was contained in OSHA inspection number 966547, citation number 1, item number 2, and was affirmed as a final order on 5/23/2014, with respect to a workplace located at 85 Industrial Park Dr. Dover, NH.