Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1046161.015
Citation: 02001A
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $13,860.00
Current Penalty: $13,860.00
Issuance Date: 08/12/2015
Nr Instances: 1
Nr Exposed: 9
Abatement Date: 06/30/2016
Gravity: 10
Report ID: 0524700
Contest Date: 08/21/2015
Final Order: 06/15/2016
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 06/15/2016 | $13,860.00 | 06/30/2016 | Repeat | |
| Penalty | C: Contested | 08/26/2015 | $13,860.00 | 08/19/2015 | Repeat | |
| Penalty | Z: Issued | 08/12/2015 | $13,860.00 | 08/19/2015 | Repeat |
Text For Citation: 02 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: A) Quality Blow Molding, Inc., located at 635 Oberlin Elyria Road, Elyria, OH 44035: On or about March 2, 2015, the employer did not ensure that employees utilize established energy control procedures to control hazardous energy of the B-13 Plastic Injection Blow Molding Machine # 1. Employees did not control all hazardous energy sources such as, but not limited to, electrical and hydraulic before performing activities such as, but not limited to, unjamming the machine. Employees were exposed to amputation and heat hazards. Quality Blow Molding, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard (1910.147(c)(1)), which was contained in OSHA Inspection # 313784936, Citation number 1, Item number 1, and was affirmed as a final order on December 20, 2010, with respect to a workplace located at 635 Oberlin Elyria Road, Elyria, OH 44035.