Text For Citation: 02 Item/Group: 001 Hazard:

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Location: Davis Tool and Die, 888 Bolger Ct, Fenton, MO 63026 At the time of the inspection, three CNC milling machines were operated without door interlocks exposing employees to point of operation hazards, including but not limited to: a) #606 Okuma Howa Millac 852V CNC Vertical Machine Center located in bay 1; b) #628 Hurco MDL VMX24 CNC Vertical Machine Center located in bay 3; c) #601 Okuma Vertical Machine CNT, MC-4VAE; d) At the time of the inspection, the spindle belonging to #601 Okuma Vertical Maching CNT, MC-4VAE was inadequately guarded by an adjustable polycarbonate shield. e) At the time of the inspection, #323 RK hydraulic 150 Ton Press, m/n 150T-E/H, in bay 3 had no guard. Poplar Bluff Tool & Die was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.212(a)(3)(ii), which was contained in OSHA inspection number 316235415, citation number 1, item number 1 and was affirmed as a final order on 03/22/2012, with respect to a workplace located at 266 Township Line Road, Poplar Bluff, MO, 63901.