Translate
Violation Detail
Standard Cited: 19100181 C01 I Derricks.
Inspection Nr: 313702151
Citation: 02001
Citation Type: Other
Abatement Date: 04/21/2010 X
Initial Penalty: $12,500.00
Current Penalty: $7,000.00
Issuance Date: 10/07/2009
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity: 03
Report ID: 0830300
Contest Date: 10/26/2009
Final Order: 04/21/2010
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 04/21/2010 | $7,000.00 | 04/21/2010 | Other | |
| Penalty | Z: Issued | 10/07/2009 | $12,500.00 | 11/09/2009 | Repeat |
Text For Citation: 02 Item/Group: 001 Hazard: CRUSHING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to falls and crushing hazards: (a) For the employees being hoisted by an Ingersoll Rand pneumatic winch, model FA2.5A-13MX1, serial number MW006719, on Nabors Drilling rig #460 located in McKenzie County, North Dakota. The winch was not designed or approved by the manufacturer for hoisting or lowering personnel. Note: One feasible and acceptable method of abatement would be for the employer to replace the pneumatic winch with an approved hoist and provide specific training and policy prohibiting the use of unapproved devices for hoisting personnel. Note: This company was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard which was contained in OSHA Inspection Number 310591268, Citation Number 1, Item Number 1, issued on December 10, 2007. Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Sample Abatement Certification Letter").tion