Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 304591548
Citation: 02001
Citation Type: Other
Abatement Date: 08/05/2002 X
Initial Penalty:
Current Penalty:
Issuance Date: 07/03/2002
Nr Instances: 4
Nr Exposed: 2
Related Event Code (REC):
Gravity: 01
Report ID: 0215800
Contest Date:
Final Order:
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/08/2002 | 08/05/2002 | Other | ||
| Penalty | Z: Issued | 07/03/2002 | 08/05/2002 | Other |
Text For Citation: 02 Item/Group: 001 Hazard: STRUCK BY
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to THE HAZARD OF BEING STRUCK-BY THE LOAD : a)Kill Floor, on or about 6/21/02: Overhead hoists, including but not limited to those used for hide removal, were not being inspected on a frequent and periodic basis. ABATEMENT NOTES: Among other methods, one feasible method of abatement is to: 1). Conduct frequent and periodic inspections of the hoists for wear, deterioration and malfunction as per ASME B30.16-1987. Abatement certification must be submitted for this item.