Translate
Violation Detail
Standard Cited: 19100305 G02 III Wiring methods, components, and equipment for general use.
Inspection Nr: 1835926.015
Citation: 02001
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 12/23/2025
Nr Instances: 1
Nr Exposed: 4
Abatement Date:
Gravity:
Report ID: 0626300
Contest Date:
Final Order: 01/12/2026
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/12/2026 | $0.00 | Other | ||
| Penalty | Z: Issued | 12/23/2025 | $0.00 | Other |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a) On or about July 8, 2025, the employer did not protect employees from electrical shock in that an electrical cord used to supply power to the Optimus Lift5K table marked HL062 was found with its male cord end fitting no longer providing strain relief and the outer sheathing of the cord pulled approximately one inch out.