Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1792964.015
Citation: 02001
Citation Type: Willful
Abatement Status: Abatement Completed
Initial Penalty: $82,757.00
Current Penalty: $57,931.00
Issuance Date: 05/23/2025
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 07/25/2025
Gravity: 10
Report ID: 0524500
Contest Date:
Final Order: 06/04/2025
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/04/2025 | $57,931.00 | 07/25/2025 | Willful | |
| Penalty | Z: Issued | 05/23/2025 | $82,757.00 | 06/04/2025 | Willful |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about December 2, 2024, an employee was exposed to amputation hazards, while performing service and maintenance operations on Conveyor 8 in the Basement, Room 1. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employee from machine servicing hazards.