Text For Citation: 02 Item/Group: 001 Hazard:

29 CFR 1910.147(c)(4)(i): Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section. Note: Exception: The employer need not document the required procedure for a particular machine or equipment, when all of the following elements exist: a) On or about November 8, 2024, the employer did not ensure energy control procedures were utilized by each authorized employee assigned to perform servicing and maintenance activities to include troubleshooting and changing belts on the 5A2 elevator lift conveyor that was part of a machine NP2 Sub Assy Steel Ball Force Fit Machine. b) On or about January 10, 2025, the employer did not ensure energy control procedures were utilized by each authorized employee assigned to perform servicing and maintenance activities to include cleaning the mist eater and cleaning sensors in the machining area of the Horkos Machining Center on the Subaru Line 3 OP-10 #1. The Yamada North America, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(c)(4)(i) which was contained in OSHA inspection number 1714561, citation number 1, item number 1 and was affirmed as a final order on May 29, 2024, with respect to a workplace located at 9000 Columbus Cincinnati Road, South Charleston, OH 45368.