Text For Citation: 02 Item/Group: 001 Hazard:

29 CFR 1910.219(c)(4)(i):Unguarded projecting shaft ends projected more than one half of the diameter of the shaft: Throughout the facility, employee(s) engaged in milling activities were exposed to laceration hazards in that projecting end shafts projected more than one half the diameter of the shaft in the following instances: 1) M41 Machine horizontal shaft diameter was approximately 1 1/4 inch. The horizontal shaft projected approximately 1 1/4 inch. 2) M36A Machine horizontal shaft diameter was approximately 1 1/4 inch. The horizontal shaft projected approximately 2 inches. 3) M17 Machine horizontal shaft diameter was approximately 1 1/4 inch. The horizontal shaft projected approximately 1 inch. 4) M18 Machine horizontal shaft diameter was approximately 1 1/4 inch. The horizontal shaft projected approximately 1 inch. Red River Commodities, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.219(c)(4)(i), which was contained in OSHA inspection number 1489855, citation number 1, item number 1-b and was affirmed as a final order on 03-09-2021, with respect to a workplace located at 340 40th Street NW. Fargo, ND 58102