Text For Citation: 02 Item/Group: 001 Hazard:

29 CFR 1910.147(c)(4)(ii): The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following: (A) A specific statement of the intended use of the procedure; (D) Specific requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control measures. a) On or about October 3, 2023, the employer did not ensure that the lockout procedure for the Giddings & Lewis Horizontal Boring Mill Model H70FX SN#465-11 provided a statement of intended use for when the lockout procedure was to be used and how to verify that electrical, hydraulic, and pneumatic energy were no longer present. b) On or about October 3, 2023, the employer did not ensure that the lockout procedure for the Toshiba TUE-200 Vertical Lathe SN 440588 provided a statement of intended use for when the lockout procedure was to be used and how to verify that the electrical energy was no longer present. The A&B Foundry, Machining and Fabrications and AKA VSCORP, LLC AKA and A&B Foundry LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.147(c)(4)(ii), which was contained in OSHA inspection number 1482240, citation number 1, item number 3a and was affirmed as a final order on April 26, 2022, with respect to a workplace located at 4754 US 40, Tipp City, OH 45371.