Text For Citation: 02 Item/Group: 001 Hazard:

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) On or about May 17, 2023, individuals performing duties such as, but not limited to, shingle removal and installation on a residential high pitch slope roof at a height greater than 6ft were doing so without fall protection. Ignacio Correa dba IGC Roofing and Construction, LLC, was previously cited for a violation of this Occupational Safety and Health Standard or its equivalent standard 29 CFR 1926.501(b)(13), which was contained in OSHA inspection number 1626877, citation number 1, item number 1 was issued on January 27, 2023, and was affirmed as a final order on March 24, 2023, with respect to a workplace located at 135 S Worthington St Oconomowoc, WI 53066. Ignacio Correa dba IGC Roofing and Construction, LLC, was previously cited for a violation of this Occupational Safety and Health Standard or its equivalent standard 29 CFR 1926.501(b)(13) , which was contained in OSHA inspection number 1611016, citation number 1, item number 1 was issued on December 21, 2022, and was affirmed as a final order on January 20, 2023, with respect to a workplace located at 1132 Oriole Drive, Oconomowoc, WI 53066. Ignacio Correa dba IGC Roofing and Construction, LLC, was previously cited for a violation of this Occupational Safety and Health Standard or its equivalent standard 29 CFR 1926.501(b)(13) , which was contained in OSHA inspection number 1438496, citation number 1, item number 1 was issued on December 11, 2019, and was affirmed as a final order on January 9, 2020, with respect to a workplace located at 132 Grady Dr., Bolingbrook, IL 60440. To abate this violation, the employer must ensure that affected employees use appropriate fall protection when exposed to fall hazards greater than 6 feet in height in the construction industry. Pursuant to 29 CFR 1903.19, abatement certification and documentation are required for this item. The employer's certification that abatement is complete must include [in addition to the requirements in 1903.19(h)], the date and method of abatement and a statement that affected employees have been informed of the abatement. The employer must also submit documents demonstrating that abatement is complete to include, but not limited to, evidence of the purchase or repair of equipment, photographic or video evidence of abatement, or other written records.